Alamo 60C Operator's Manual do Operador descarregar pdf (Página 99)

MAINTENANCE

BH20 Series 04/13 Maintenance Section 5-5

MAINTENANCE

GEARBOX

The gearbox should be full (3 quarts) and not

require additional lubricant unless the box is

cracked or a seal is leaking. It is recommended that

the oil level dipstick (Figure MntP-R-0278) be

removed to check oil level after every 8 hours of

operation. If required, oil should be added until it

comes to proper level.

Recommended lubricant is EP80W-90 Gear Oil.

NOTE: Make sure mower is level when checking oil

in the gearbox.

Gearbox capacity is 3 quarts.

NOTE: Overfilling of Gearbox will cause pressure to build up and cause Grease Seals to leak.

TAIL WHEEL ASSEMBLY

Tail Wheel Bearings are packed at the factory with

heavy-duty bearing grease. Grease Fittings are

provided in the Wheel Hub and Tail Wheel Beam.

Grease after 8 hours of use. Figure MntP-R-0191.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 137 138

Sem comentários

Alamo 60C Operator's Manual do Operador Página 99